Backing-Up And Restoring Configuration Files; Accessing The System Configuration Screen - Safran VersaSync User Manual

4.8.2

Backing-up and Restoring Configuration Files

Once VersaSync has been configured, it may be desired to back up the con-
figuration files to a PC for off-unit storage. If necessary in the future, the original
configuration of the VersaSync can then be restored into the same unit.
The capability to backup and restore configurations also adds the ability to
"clone" multiple VersaSync units with similar settings. Once one VersaSync unit
has been configured as desired, configurations that are not specific to each unit
(such as NTP settings, log configs, etc.) can be backed up and loaded onto
another VersaSync unit for duplicate configurations.
There are several configuration files that are bundled in one file for ease of hand-
ling.
4.8.2.1

Accessing the System Configuration Screen

The System Configuration Screen provides comprehensive information about
hardware and software status. To access the System Configuration screen:
The System Configuration screen consists of 5 panels:
The Actions panel
CHAPTER •
4 VersaSync User Manual Rev. 12
Note: For security reasons, configurations relating to security of the
product, such as SSH/SSL certificates, cannot be backed up to a PC.
1. Navigate to TOOLS > SYSTEM:
2. The System Configuration
4.8 Resetting the Unit to Factory Configuration
Upgrade/Backup.
screen will display:
295