Create A New Device; Load Local License File In The Device - Safran WR-ZEN Series User Manual

8.1 Licenses
8.1.4.2

Create A New Device

8.1.4.3

Load local license file in the device

In order to load the generated license file, the user first needs to access to the
Management > Licenses within the web interface of the device.
170
Note: A license file will be generated using a <DEVICE_ID>.bin file-
name pattern. Do not rename this file otherwise it will not be prop-
erly recognized when loading it to the device. If a <DEVICE_ID>.bin
file is already present in your Download folder, the new generated
file will be automatically renamed with a prefix (i.e., <DEVICE_ID>
(1).bin). Please remove this prefix before uploading the file.
First click on Create Device Button.
The fill the following parameters:
Name: unique device name on the network. It is recommended to use
the same name as the hostname.
Run Licenses Server: Disabled
ID Type: ETHERNET
ID: It corresponds to the eth0 physical address (MAC) of the device.
Note: The device ID format is based on the eth0 MAC address, but
without the doble-dot (:) and with only upper-case characters. It can
also be obtained from a terminal by executing:
gpa_ctrl hald net/eth0/ethaddr | sed 's/://g'
CHAPTER •
8 WR-ZEN Series User Manual Rev. v5.1