Applying A License File - Safran VersaSync User Manual

4.7 Updates and Licenses
7. Verify that the update was successful: Navigate to
4.7.2

Applying a License File

Software options must be activated by applying a license file (OPT-xyz):
Typically, VersaSync units are shipped with the license file pre-installed, reflect-
ing the system configuration as ordered. If, however, a feature is to be activated
after delivery of the VersaSync unit, please contact your local Safran Sales Office
first to have a license file generated. License files are archive files with a tar.gz
extension. One license file may contain multiple licenses for multiple products.
To apply the license file, you need to upload it into your VersaSync unit and install
it:
1. Save the license file license.tar.gz to a location on your PC (which
2. Open the VersaSync Web UI, and navigate to
292
Upgrade/Backup, and confirm the new SW version in the
figuration panel.
Note: Should you use DHCP, a new IP address may be assigned to
your unit, and you may have to point your web browser to it.
Note: In the event that the update failed, see
ware Update" on
needs to be connected to the same network VersaSync is.)
page 311.
CHAPTER
Tools >
System Con-
"Troubleshooting Soft-
Tools > Upgrade/Backup:
•
4 VersaSync User Manual Rev. 12