Adding/Removing A Tacacs+ Server - Safran VersaSync User Manual

4.4 Managing Users and Security
1. In the Web UI, navigate to
2. In the
3. Configure the
4. Under Enable TACACS+, click the toggle to
5. Click Submit.
4.4.6.2

Adding/Removing a TACACS+ Server

To add a TACACS+ authentication server, or remove a server from the list:
1. Navigate to
2. In the
3. Fill out the fields:
4. Click the
262
Actions panel on the left, click TACACS+. The
dow will be displayed.
Default User Group
missions level (Admin or User)
click the toggle to OFF
MANAGEMENT > OTHER:
Actions panel on the left, click
window will be displayed:
Host: The hostname or IP address of the TACACS+ server
Port: Defines the TACACS+ Port to use.
IPv6: Enables IPv6 and reveals a field to select a Parent Interface.
Secret Key: The same encryption key as used on the TACACS+
server.
Add Server
added will be displayed if the server could be added, and the server will be
added to the list. The server status can be:
MANAGEMENT > OTHER:
to select your preferred default user per-
to disable this feature.
Authentication.
TACACS+
button. A confirmation message
CHAPTER
Authentication.
TACACS+ Setup
ON to enable TACACS+, and
Setup. The TACACS+ Setup
The item has been
•
4 VersaSync User Manual Rev. 12
win-