Specific Snmp V1/V2 Configuration; Specific Snmpv3 Configuration - Safran WR-ZEN Series User Manual

7.2.1.2

Specific SNMP v1/v2 configuration

Additional SNMP v1 and v2 communities can be created editing the /etc/s-
nmp/snmpd.conf file adding the following line:
rocommunity <community_name>
After modifying the file, restart the SNMP daemon to load the changes.
Alternatively, the groups definition can be modified to create and add com-
munities. For that purpose, the information from the mapping section in /us-
r/share/snmp/snmpd.conf can be used as a reference to modify the
/etc/snmp/snmpd.conf file.
7.2.1.3

Specific SNMPv3 configuration

By default, there are four created users in the device:
userSNMP
adminSNMP
secuserSNMP
secadminSNMP
In the case of SNMP v3 the default passwords can be modified using the para-
meters under the change password sub-tree:
13.3800.0
CHAPTER •
7 WR-ZEN Series User Manual Rev. v5.1
Auth Pro-
snmpv3 User
tocol
MD5
MD5
SHA
SHA
Note: SNMP v3 user parameters: Only access_view and access_
mode parameters can be directly changed. Encryption protocols are
changed through change_password.
Note: SNMP v3 users: UserSNMP and adminSNMP are included for
retro-compatibility purposes. It is recommended to use users relying
on SHA and AES encryption.
OID Name
User name
Auth
Priv Pro-
toco
(default)
DES userSNMPpass
DES adminSNMPpass
AES secuserSNMPpass
AES secadminSNMPpass
Value Type
<String> (i.e., userSNMP)
Password Priv
(default)
userSNMPpass
adminSNMPpass
secuserSNMPpass
secadminSNMPpass
Description
Name of the
SNMPv3 user.
7.2 SNMP
Password
133