Specific Snmp V1/V2 Configuration; Specific Snmpv3 Configuration - Safran WR-Z16 User Manual

7.2.1.2

Specific SNMP v1/v2 configuration

Additional SNMP v1 and v2 communities can be created editing the /etc/s-
nmp/snmpd.conf file adding the following line:
rocommunity <community_name>
After modifying the file, restart the SNMP daemon to load the changes.
Alternatively, the groups definition can be modified to create and add com-
munities. For that purpose, the information from the mapping section in /us-
r/share/snmp/snmpd.conf can be used as a reference to modify the
/etc/snmp/snmpd.conf file.
7.2.1.3

Specific SNMPv3 configuration

By default, there are four created users in the device:
userSNMP
adminSNMP
secuserSNMP
secadminSNMP
CHAPTER •
7 WR-Z16 User Manual Rev. v5.0
Note:
SNMP credentials reset: The snmpd force- reset command
recreates persistent files but maintains the SNMP parameters sub-
tree
The information in /usr/share/shmp/snmpd.conf is recreated fol-
lowing the saved SNMP sub-tree configuration.
Auth Pro-
snmpv3 User
tocol
MD5
MD5
SHA
SHA
Note:
SNMP v3 user parameters: Only access_ view and access_
mode parameters can be directly changed. Encryption protocols are
changed through change_password.
Auth
Priv Pro-
toco
(default)
DES userSNMPpass
DES adminSNMPpass
AES secuserSNMPpass
AES secadminSNMPpass
configuration.
Password Priv
(default)
userSNMPpass
adminSNMPpass
secuserSNMPpass
secadminSNMPpass
7.2 SNMP
Password
119