HANDLING INSTRUCTIONS
Heating i i nterior c c omfortably
When the windows are clear and the
desired temperature has been reached we
recommend the following settings:
•
Rotary switch B at stage 1 or 2.
•
Rotary regulator A at the desired heat
output.
•
Rotary regulator C, depending on
desired air distribution, to ............
or to .............................................
•
If windscreen is misted over,
rotary regulator C to .......................
•
Vents 3 closed.
•
With vents 4 the desired amount of
warm air and the air flow direction can be
set.
2.72
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Normal c c ooling
•
Rotary switch B to stage 1-4 as required.
•
Rotary regulator A to the desired air
temperature (so that heating is also pos-
sible).
•
Rotary regulator C to desired position.
•
When rotary regulator C is in this
position, at least one air vent must
be open at all times as the cooling
system could otherwise ice up .......
•
Press button D.
•
Vents 3 and 4 set as required.
In this operating mode air is drawn in
from outside and cooled.
AR0-025
CLIMATE CONTROL