Qos Map Dscp-Queue - HP Bc1500 - BladeSystem - Blade PC Reference Manual

qos map dscp-queue

The qos map dscp-queue Global Configuration mode command modifies the DSCP to CoS
map. To return to the default map, use the no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue
Parameters
■
dscp-list — Specifies up to 8 DSCP values separated by a space. (Range: 0-63)
■
queue-id — Specifies the queue number to which the DSCP values are mapped.
Default Setting
The following table describes the default map.
DSCP Value
0-15
16-31
32-47
48-63
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command maps DSCP values 33, 40 and 41 to queue 1.
Console(config)# qos map dscp-queue 33 40 41 to 1
HP PC Blade Switch CLI Reference Guide
Queue Number
q1 (Lowest Priority)
q2
q3
q4
www.hp.com
QoS Commands
18-25