REAR SUSPENSION
3. Rear Stabilizer
A: REMOVAL
1) Jack-up the rear part of the vehicle, support it
with safety stands (rigid racks).
2) Remove the bolt which secures stabilizer link to
rear lateral link.
3) Remove the bolt and nut which secure stabilizer
to stabilizer bracket.
REAR STABILIZER
B: INSTALLATION
1) Install in the reverse order of removal.
NOTE:
• Install the bushing while aligning it with paint
mark on stabilizer.
• Ensure that bushing and stabilizer have the
same identification colors when installing.
SU0017
2) Always tighten the rubber bushing location when
wheels are in full contact with the ground and vehi-
cle is curb weight.
Tightening torque:
Stabilizer link to rear lateral link
45 N·m (4.6 kgf-m, 33.2 ft-lb)
Stabilizer to stabilizer bracket
25 N·m (2.5 kgf-m, 18.1 ft-lb)
SU0018
C: INSPECTION
1) Check the bushing for cracks, fatigue or dam-
age.
2) Check the stabilizer links for deformities, cracks,
or damage, and bushing for protrusions from the
hole of stabilizer link.
RS-10
(1) Mark stamped on stabilizer
(2) Bushing identification color
SU0012