OSPF
3
IP
6 C
V
FOR
V
OMMANDS
6
SHOW IPV
OSPF DATABASE NETWORK
show ipv6 ospf database network
Overview
Use this command in User Exec or Privileged Exec modes to display information
about the network LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ipv6 ospf database network <adv-router-id>
[self-originate|adv-router <adv-router-id>]
Mode
User Exec and Privileged Exec
Examples
To display information about the OSPFv3 network LSAs, use the following
command:
awplus#
Output
Figure 28-10: Example output from the show ipv6 ospf database network
C613-50186-01 Rev B
Parameter
<adv-router-id>
self-originate
adv-router
show ipv6 ospf database network
command
OSPFv3 Router with ID (0.0.1.1) (Process P10)
Network-LSA (Area 0.0.0.0)
LS age: 97
LS Type: Network-LSA
Link State ID: 0.0.0.202
Advertising Router: 0.0.1.2
LS Seq Number: 0x800000C3
Checksum: 0x92C4
Length: 32
Options: 0x000013 (-|R|-|-|E|V6)
Attached Router: 0.0.1.2
Attached Router: 0.0.1.1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The router ID of the advertising router, in IPv4 address format.
Note, however, that this no longer represents a real address.
Self-originated link states.
The advertising router selected.
"Getting Started
Guide.
1075