Show Ip Bgp Neighbors Keepalive-Interval (Bgp Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
SHOW IP BGP NEIGHBORS KEEPALIVE
show ip bgp neighbors keepalive-interval
(BGP only)
Overview Use this command to display the configured keepalive-interval value of the peer at
the session establishment time with the neighbor.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip bgp neighbors <ipv4-addr> keepalive-interval
Syntax
Default The keepalive timer default is 60 seconds as per RFC 4271. Keepalive is holdtime / 3.
Mode User Exec and Privileged Exec
awplus#
Examples
Related neighbor timers
Commands
show ip bgp neighbors hold-time (BGP only)
timers (BGP)
C613-50186-01 Rev B
- (BGP )
INTERVAL ONLY
Parameter
<ipv4-addr>
show ip bgp neighbors 10.11.4.26 keepalive-interval
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
"Getting Started
Guide.
1356