Export Map - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS

EXPORT MAP

export map
Overview This command associates a route map with a specific VRF instance. It provides a
finer control over the routes that are exported out of a VRF instance by the
route-target command. Note, however, that this command does not replace the
need for a route-target export in the VRF configuration.
The no variant of this command disables the capability to export route map entries
for a specified VRF instance.
export map <route-map>
Syntax
no export map
Mode VRF Configuration
Usage Use this command to export route-map entries in VRF configuration mode.
Example To export the route map named routemap2 for the VRF instance named blue, use
the following commands:
awplus#
awplus(config)#
awplus(config-vrf)#
Related import map
Commands
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
Parameter Description
<route-map>
The route-map name.
config terminal
ip vrf blue
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
export map routemap2
1458