Allied Telesis AR2050V Command Reference Manual page 1474

VRF- C
LITE OMMANDS
-
NEIGHBOR REMOTE AS
The vrf and global parameters are used to create internal 'loopback' BGP
connections within the device between two VRF instances. This is used to leak BGP
routes between a named VRF instance and the global routing instance. This
requires BGP neighbors to be configured in both the global routing instance and
in the named VRF instance.
Examples [BGP] To configure a BGP peering relationship from the neighbor with the IPv4 address
10.10.0.73 with another router:
awplus#
awplus(config)#
awplus(config-router)#
To remove a configured BGP peering relationship from the neighbor with the IPv4
address 10.10.0.73 from another router:
awplus#
awplus(config)#
awplus(config-router)#
To configure a BGP peering relationship from the neighbor with the peer group
named group1 with another router:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
To remove a configured BGP peering relationship from the neighbor with the peer
group named group1 with another router:
awplus#
awplus(config)#
awplus(config-router)#
Examples To configure a BGP4+ peering relationship with another router:
[BGP4+]
awplus#
awplus(config)#
awplus(config-router)#
To remove a configured BGP4+ peering relationship from another router:
awplus#
awplus(config)#
awplus(config-router)#
345
C613-50186-01 Rev B
configure terminal
router bgp 10
neighbor 10.10.0.73 remote-as 10
configure terminal
router bgp 10
no neighbor 10.10.0.73 remote-as 10
configure terminal
router bgp 10
neighbor group1 peer-group
neighbor 10.10.10.1 remote-as 10
neighbor 10.10.10.1 peer-group group1
neighbor group1 remote-as 10
configure terminal
router bgp 10
no neighbor group1 remote-as 10
configure terminal
router bgp 11
neighbor 2001:0db8:010d::1 remote-as 345
configure terminal
router bgp 11
no neighbor 2001:0db8:010d::1 remote-as
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1474