Show Ip Rip Vrf Interface - Allied Telesis AR2050V Command Reference Manual

RIP C
OMMANDS

SHOW IP RIP VRF INTERFACE

show ip rip vrf interface
Overview Use this command to display information about the RIP interfaces that are
associated with a specific VRF instance.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip rip {vrf <vrf-name>|global} interface
[<interface-name>]
Mode User Exec and Privileged Exec
Example To display information about the RIP database associated with a VRF instance
'blue', use the command:
awplus#
Output Figure 25-4: Example output from show ip rip vrf blue interface vlan3
Codes: R - RIP, Rc - RIP connected, Rs - RIP static
C - Connected, S - Static, O - OSPF, B - BGP

Network
Rc 192.168.30.0/24
R 192.168.45.0/24
NOTE
•
•
•
Related show ip rip
Commands
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
Parameter
vrf
<vrf-name>
global
<interface-name>
show ip rip vrf blue interface
Next Hop
192.168.30.1 2
: The Time parameter operates as follows:
RIP updates occur approximately every 30 seconds.
Each update resets a count-down timer to 180 seconds (3 minutes).
The Time parameter displays the count-down from the last reset.
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Specific VRF instance.
The name of the VRF instance.
The global routing and forwarding table.
The IP RIP interface (VLAN).
Metric From
1
192.168.30.1
"Getting Started
Guide.
If Time
vlan3
vlan3 02:46
867