Neighbor Soft-Reconfiguration Inbound - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
NEIGHBOR SOFT RECONFIGURATION INBOUND

neighbor soft-reconfiguration inbound

Overview Use this command to configure the device to start storing all updates from the BGP
or BGP4+ neighbor, without any consideration of any inward route filtering policy
that might be applied to the connection with this BGP or BGP4+ neighbor. This is
so that the full set of the neighbor's updates are available locally to be used in a
soft-reconfiguration event.
You may need to apply this older method of clearing routes if the peer does not
support route refresh.
Use the no variant of this command to disable this function for a BGP or BGP4+
neighbor.
neighbor <neighborid> soft-reconfiguration inbound
Syntax
no neighbor <neighborid> soft-reconfiguration inbound
Mode [BGP] Router Configuration or IPv4 Address Family Configuration
Mode [BGP4+] IPv6 Address Family Configuration
Usage Use this command to store updates for inbound soft reconfiguration.
Soft-reconfiguration may be used in lieu of BGP route refresh capability. Using this
command enables local storage of all the received routes and their attributes. This
requires additional memory. When a soft reset (inbound) is done on this neighbor,
the locally stored routes are re- processed according to the inbound policy. The
BGP neighbor connection is not affected.
C613-50186-01 Rev B
Parameter Description
<neighborid> {<ip-address>|<ipv6-addr>|<peer-group>}
<ip-address> Specify the address of an IPv4 BGP neighbor, in
<ipv6-addr>
<peer-group> Enter the name of an existing peer-group. For
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
dotted decimal notation A.B.C.D.
Specify the address of an IPv6 BGP4+ neighbor,
entered in hexadecimal in the format X:X::X:X.
information on how to create peer groups, refer
to the neighbor peer-group (add a neighbor)
command, and neighbor route-map
When this parameter is used with this
command, the command applies on all peers in
the specified group.
command.
1282