L2Tp Profile - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
2
L TP PROFILE

l2tp profile

Overview Use this command to set the profile to use for L2TP traffic for this PPPoE Access
Concentrator (AC).
Use the no variant of this command to remove L2TP profile setting from this PPPoE
AC.
Syntax l2tp profile <l2tp-profile-name>
no l2tp profile <l2tp-profile-name>
Default This command is not configured by default.
Mode PPPoE Access Concentrator Configuration
Usage The L2TP profile name used in this command is created by the l2tp-profile
command.
Example To allow AC service "ISP-service" to use the L2TP profile called "PUBLIC", use the
commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
To unset the L2TP profile for the AC service "ISP-service", use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
Related destination l2tp
Commands
l2tp-profile
l2tp peer-address dns-lookup
l2tp peer-address radius-lookup group
l2tp peer-address static
l2tp-profile
pppoe-ac
ppp-auth-protocol
service-name
C613-50186-01 Rev B
OMMANDS
Parameter
<l2tp-profile-name>
configure terminal
pppoe-ac ISP-service
configure terminal
pppoe-ac ISP-service
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The name of the L2TP profile that the PPPoE AC is to use.
to use.
l2tp profile PUBLIC
no l2tp profile PUBLIC
628