RIP
IP
6 C
NG FOR
V
OMMANDS
6
SHOW IPV
PROTOCOLS RIP
show ipv6 protocols rip
Overview
Use this command to display RIPng process parameters and statistics.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ipv6 protocols rip
Mode
User Exec and Privileged Exec
Example
To display RIPng process parameters and statistics, use the following command:
awplus#
Output
C613-50186-01 Rev B
show ipv6 protocols rip
awplus#show ipv6 protocols rip
Routing Protocol is "RIPng"
Sending updates every 30 seconds with +/-5 seconds, next due
in 6 seconds
Timeout after 180 seconds, garbage collect after 120 seconds
Outgoing update filter list for all interface is not set
Incoming update filter list for all interface is not set
Default redistribute metric is 1
Redistributing:
Interface
vlan3
Routing for Networks:
fe80::200:cdff:fe27:c086 vlan1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
893