Max-Static-Routes (Vrf) - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS
- - (VRF)
MAX STATIC ROUTES

max-static-routes (VRF)

Overview Use this command to set the maximum number of static routes (excluding
FIB—Forwarding Information Base routes) for VRF instances. A limit of 1000 static
routes can be assigned to each individual VRF instance. For example you can
assign 800 static routes to the Global VRF, then also assign 600 static routes to VRF
instance Blue, and a further 600 routes to VRF instance Green.
NOTE
max-static-routes for the Global VRF instance use the
FIB routes use the
max-fib-routes (VRF)
Use the no variant of this command to reset the maximum number of static routes
to the default value of 1000.
Syntax max-static-routes <1-1000>
no max-static-routes
Default The default number of static routes is the maximum number of static routes (1000).
Mode VRF Configuration
Example To assign 200 static routes to VRF instance Blue, use the following commands:
awplus#
awplus(config)#
awplus(condig-vrf)#
NOTE
Base). Therefore, rejected static routes will not appear in the running config.
Related max-fib-routes (VRF)
Commands
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
: This command applies to a user-defined VRF instance; to set the
max-fib-routes
command for a user-defined VRF instance.
configure terminal
ip vrf blue
max-static-routes 200
: Static routes are applied before adding routes to the RIB (Routing Information
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
max-static-routes
command for the Global VRF instance and the
command. For
1469