Show Debugging Ipv6 Rip - Allied Telesis AR2050V Command Reference Manual

RIP IP 6 C
NG FOR V OMMANDS
6
SHOW DEBUGGING IPV RIP

show debugging ipv6 rip

Overview Use this command to display the RIPng debugging status for the debugging
options of: nsm debugging, RIPng event debugging, RIPng packet debugging, and
RIPng nsm debugging.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show debugging ipv6 rip
Syntax
Mode User Exec and Privileged Exec
Usage Use this command to display the debug status of RIPng.
Example To display the RIPng debugging status, use the following command:
awplus#
C613-50186-01 Rev B
show debugging ipv6 rip
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
892