Show Route-Map - Allied Telesis AR2050V Command Reference Manual

R M C
OUTE AP OMMANDS
-
SHOW ROUTE MAP

show route-map

Overview Use this command to display information about one or all route maps.
show route-map <map-name>
Syntax
Mode User Exec and Privileged Exec
To display information about the route-map named example-map, use the
Example
command:
awplus#
Output Figure 30-1: Example output from the show route-map command
Related route-map
Commands
C613-50186-01 Rev B
Parameter Description
<map-name>
A name to identify the route map.
show route-map example-map
route-map example-map, permit, sequence 1
Match clauses:
ip address prefix-list example-pref
Set clauses:
metric 100
route-map example-map, permit, sequence 200
Match clauses:
Set clauses:
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1420