Neighbor Peer-Group (Create A Peer-Group) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
- (
NEIGHBOR PEER GROUP CREATE A PEER

neighbor peer-group (create a peer-group)

Overview Use this command to create a peer-group for BGP and BGP4+.
Use the no variant of this command to disable this function.
Syntax neighbor <peer-group> peer-group
no neighbor <peer-group> peer-group
Mode [BGP] Router Configuration or IPv4 Address Family Configuration
Mode [BGP4+] Router Configuration
Usage Neighbors with the same update policies are grouped into peer groups. This
facilitates the updates of various policies, such as, distribute and filter lists.
The peer-group is then configured easily with many of the neighbor commands.
Any changes made to the peer group affect all members.
Use this command to create a peer-group, then use the
a neighbor)
Examples awplus#
awplus(config)#
awplus(config-router)#
awplus#
awplus(config)#
awplus(config-router)#
Related neighbor peer-group (add a neighbor)
Commands
C613-50186-01 Rev B
- )
GROUP
Parameter Description
<peer-group>
Enter the name of the peer-group.
command to add neighbors to the group.
configure terminal
router bgp 10
configure terminal
router bgp 10
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
neighbor group1 peer-group
no neighbor group1 peer-group
neighbor peer-group (add
1257