Max-Fib-Routes (Vrf) - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS
- - (VRF)
MAX FIB ROUTES

max-fib-routes (VRF)

Overview This command now enables you to control the maximum number of FIB routes
configured for a VRF instance. It operates by providing parameters that enable you
to configure preset maximums and warning message thresholds.
NOTE
for the Global VRF instance use the
max-static-routes
(VRF)
Use the no variant of this command to set the maximum number of FIB routes to
the default of 4294967294 FIB routes.
max-fib-routes <1-4294967294> [<1-100>|warning-only]
Syntax
no max-fib-routes
Mode VRF Configuration
Default Sets the maximum number of dynamic routes to 4294967294 and no warning
threshold.
Examples To set the maximum number of dynamic routes to 2000 and warning threshold of
75% on VRF instance blue, use the commands:
awplus#
awplus(config)#
awplus(config-vrf)#
C613-50186-01 Rev B
: This command applies to a user-defined VRF instance; to set the max-fib-routes
command for the Global VRF instance and the
command for a user-defined VRF instance.
Parameter Description
max-fib-routes
The maximum number of routes that can be stored in
Forwarding Information dataBase for either the Global VRF or a
VRF instance.
<1-4294967294>
The allowable configurable range for setting the maximum
number of FIB-routes.
<1-100>
This parameter enables you to optionally apply a percentage
value. This percentage will be based on the maximum number
of FIB routes you have specified. This will cause a warning
message to appear when your routes reach your specified
percentage value. Routes can continue to be added until your
configured maximum value is reached.
warning-only
This parameter enables you to optionally apply a warning
message. If you set this option a warning message will appear if
your maximum configured value configured. Routes can
continue to be added until your switch reaches either the
maximum capacity value of 4294967294, or a practical system
limit.
config terminal
ip vrf blue
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
max-fib-routes command. For static routes use the
max-fib-routes 2000 75
max-static-routes
1467