Ip Ddns-Update-Method - Allied Telesis AR2050V Command Reference Manual

D N S (DNS) C
OMAIN AME ERVICE
- -
IP DDNS UPDATE METHOD

ip ddns-update-method

Overview Use this command to enable an IPv4 interface to update DDNS with the specified
DDNS update method.
Use the no variant of this command to disable an IPv4 interface to update DDNS
with the specified DDNS update method.
Syntax ip ddns-update-method <method-name>
no ip ddns-update-method <method-name>
Default None
Mode Interface Configuration
Usage A DDNS update method cannot be attached to multiple interfaces, however
multiple DDNS update methods can be assigned to the same interface.
Example To enable IPv4 DDNS updates for a DDNS update method named "dyndns" using
interface eth1, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable IPv4 DDNS updates for a DDNS update method named "dyndns" using
interface eth1, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ddns-update-method
Commands
Command Version 5.4.7-0.1: command added
changes
C613-50186-01 Rev B
OMMANDS
Parameter Description
<method-name>
A name given to a DDNS update method.
configure terminal
interface eth1
configure terminal
interface eth1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
ip ddns-update-method dyndns
no ip ddns-update-method dyndns
712