Show Pbr Rules - Allied Telesis AR2050V Command Reference Manual

P - R C
OLICY BASED OUTING OMMANDS

SHOW PBR RULES

show pbr rules
Overview Use this command to display the configured IPv4 and IPv6 policy routes. It also
shows the validity of the policy routes.
show pbr rules
Syntax
Mode User Exec/Privileged Exec
Example To show information about the policy routes, use the command:
awplus#
Output Figure 31-5: Example output from show pbr rules
Table 31-1: Parameters in the output from show pbr rules
C613-50186-01 Rev B
show pbr rules
awplus#show pbr rules 
Policy based routing is enabled 
Rule Match From
------------------------------------------------------------------
10 any entities.any
20 udp any
Parameter
Rule
Match
From
To
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
To
entities.outside
any
Description
The policy route ID number.
Policy routes are checked in order of ID number, starting
with the lowest ID number. The device applies the policy
route as soon as it finds a matching route; it does not
check the remaining policy routes.
The name of an application.
Packets will be routed to the specified next hop if they
match this application, come from the source entity, and
are destined for the destination entity.
The name of the source entity.
Packets will be routed to the specified next hop if they
match the application, come from this source entity, and
are destined for the destination entity.
The name of the destination entity.
Packets will be routed to the specified next hop if they
match the application, come from the source entity, and
are destined for this destination entity.
Valid Nexthop
10.10.20.2 
Yes
Yes 2001:100::2
1433