Route (Rip) - Allied Telesis AR2050V Command Reference Manual

RIP C
OMMANDS
(RIP)
ROUTE

route (RIP)

Overview Use this command to add a static RIP route.
Use the no variant of this command to remove a static RIP route.
Syntax route <ip-addr/prefix-length>
no route <ip-addr/prefix-length>
Default No static RIP route is added by default.
Mode RIP Router Configuration or RIP Router Address Family Configuration for a VRF
instance.
Usage Use this command to add a static RIP route. After adding the RIP route, the route
can be checked in the RIP routing table.
Example To create a static RIP route to IP subnet 192.168.1.0/24, use the following
commands:
awplus#
awplus(config)#
awplus(config-router)#
To create a static RIP route to IP subnet 192.168.1.0/24, for the VRF instance
Example
red, use the following commands
(VRF-lite)
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
Related show ip rip
Commands
clear ip rip route
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
Parameter
<ip-addr/prefix-length> The IPv4 address and prefix length.
configure terminal
router rip
configure terminal
router rip
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
route 192.168.1.0/24
address-family ipv4 vrf red
route 192.168.1.0/24
857