Bgp Memory Maxallocation - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS

BGP MEMORY MAXALLOCATION

bgp memory maxallocation
Overview This command allocates a maximum percentage of the RAM (Random Access
Memory) available on the device for BGP processes.
When this percentage is exceeded, BGP peering terminates and an out of
resources error displays. The default setting for bgp memory maxallocation is
100% memory allocation.
Use the no variant of this command to reset memory allocation to the default.
bgp memory maxallocation <1-100>
Syntax
no bgp memory maxallocation
Default BGP processes are allocated the maximum percentage of 100% of the device's
available RAM memory by default. Note only non-default BGP memory allocation
values are shown in the running or startup configuration files:
Mode Global Configuration
Examples To limit the maximum amount of memory used by BGP processes to 65% of the
total RAM memory available on the device, use the commands:
awplus#
awplus(config)#
To return to the default 100% maximum RAM memory allocation available on the
device for BGP processes, use the commands:
awplus#
awplus(config)#
C613-50186-01 Rev B
Parameter
<1-100>
awplus#show running-config
!
bgp memory maxallocation 50
!
configure terminal
bgp memory maxallocation 65
configure terminal
no bgp memory maxallocation
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Percentage of device memory allocated to BGP processes.
Note this is RAM (Random Access Memory), not device flash
memory.
1142