Clear Bgp (Asn) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
(ASN)
CLEAR BGP

clear bgp (ASN)

Overview Use this command to reset the BGP and BGP4+ connections for peers in the
specified Autonomous System Number (ASN).
clear bgp <asn> [in [prefix-filter]|out|soft [in|out]]
Syntax
Mode Privileged Exec
awplus#
Examples
awplus#
awplus#
awplus#
C613-50186-01 Rev B
Parameter Description
<asn> <1-4294967295>
The AS Number for which all routes will be cleared.
in
Indicates that incoming advertised routes will be cleared.
prefix-filter
Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their
updates to the local device, without resetting the connection or
clearing the entries in the local device. So, the local device stores
new updates, and uses them to systematically replace existing
table entries. This process can use a considerable amount of
memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
clear bgp 300 soft in prefix-filter
clear bgp 500 soft out
clear bgp 300 soft in
clear bgp 1 in prefix-filter
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1154