Timers Spf Exp - Allied Telesis AR2050V Command Reference Manual

OSPF C
OMMANDS

TIMERS SPF EXP

timers spf exp
Overview Use this command to adjust route calculation timers using exponential back-off
delays.
Use no form of this command to return to the default exponential back-off timer
values.
Syntax timers spf exp <min-holdtime> <max-holdtime>
no timers spf exp
Mode Router Configuration
Default The default SPF min-holdtime is 50 milliseconds. The default SPF max-holdtime is
40 seconds.
Usage This command configures the minimum and maximum delay time between the
receipt of a topology change and the calculation of the Shortest Path First (SPF).
Examples To set the minimum delay time to 5 milliseconds and maximum delay time to 10
milliseconds, use the commands:
awplus#
awplus(config)#
awplus(config-router)#
To reset the minimum and maximum delay times to the default values, use the
commands:
awplus#
awplus(config)#
awplus(config-router)#
Related timers spf exp
Commands
C613-50186-01 Rev B
Parameter Description
<min-holdtime> <0-2147483647>
Specifies the minimum delay between receiving a change to the
SPF calculation in milliseconds. The default SPF min-holdtime
value is 50 milliseconds.
<max-holdtime> <0-2147483647>
Specifies the maximum delay between receiving a change to the
SPF calculation in milliseconds. The default SPF max-holdtime
value is 50 seconds.
configure terminal
router ospf 100
configure terminal
router ospf 100
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
timers spf exp 5 10
no timers spf exp
997