PPP
E
(PPP
E) C
OVER
THERNET
O
SHOW DEBUGGING PPPOE AC
show debugging pppoe ac
Overview
Use this command to display the status of the PPPoE AC debugging.
show debugging pppoe ac
Syntax
Mode
Privileged Exec
Usage
Enable PPPoE AC debugging with the debug pppoe-ac command.
Example
To display the status of PPPoE AC debugging, use the command:
awplus#
Output
Figure 20-1: Example output from show debugging pppoe ac
Related
debug pppoe-ac
Commands
C613-50186-01 Rev B
OMMANDS
show debugging pppoe ac
awplus#show debugging pppoe ac
PPPoE-AC Debugging is on
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
636