Clear Ip Bgp * (Bgp Only) - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS
* (BGP )
CLEAR IP BGP ONLY

clear ip bgp * (BGP only)

Overview Use this command to reset all BGP connections, either by fully resetting sessions or
by performing soft resets.
If VRF-lite is configured, you can reset BGP connections for all VRF instances or for
a specified VRF instance.
Syntax clear ip bgp *
clear ip bgp * in
clear ip bgp * out
clear ip bgp * soft [in|out]
clear ip bgp * in [prefix-filter]
clear ip bgp * [vrf <vrf-name>]
Syntax (VRF-lite)
clear ip bgp * [vrf <vrf-name>] in
clear ip bgp * [vrf <vrf-name>] out
clear ip bgp * [vrf <vrf-name>] soft [in|out]
clear ip bgp * in [prefix-filter]
Mode Privileged Exec
C613-50186-01 Rev B
Parameter Description
*
Clears all BGP peers.
in
Indicates that incoming advertised routes will be cleared.
prefix-filter
Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their
updates to the local device, without resetting the connection or
clearing the entries in the local device. So, the local device stores
new updates, and uses them to systematically replace existing
table entries. This process can use a considerable amount of
memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
vrf
Applies the command to the specified VRF instance.
<vrf-name>
The name of the VRF instance.
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1447