Import Map - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS

IMPORT MAP

import map
Overview The import map command associates a route map with a specific VRF instance. The
import map command does not replace the need for a route-target import in the
VRF configuration. It provides a finer control over the routes imported into a VRF
instance by the route-target command.
The no variant of this command disables the capability to import route map entries
for a specified VRF instance.
import map <route-map>
Syntax
no import map
Mode VRF Configuration
Usage Use this command to import route-map entries into the specified VRF instance.
To import the route map named routemap2 for the VRF instance named blue,
Example
use the following commands:
awplus#
awplus(config)#
awplus(config-vrf)#
Related export map
Commands
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
Parameter Description
<route-map>
The route-map name.
config terminal
ip vrf blue
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
import map routemap2
1460