Set Ipv6 Next-Hop - Allied Telesis AR2050V Command Reference Manual

R M C
OUTE AP OMMANDS
6 -
SET IPV NEXT HOP

set ipv6 next-hop

Overview Use this command to set a next hop-address.
Use the no variant of this command to delete an entry.
Syntax set ipv6 next-hop {<ipv6-addr-global>|local <ipv6-addr>}
no set ipv6 next-hop [<ipv6-addr-global>|local [<ipv6-addr>]]
Mode Route-map Configuration
Usage Use this command to set the next-hop IPv6 address to the routes.
This command is valid only for BGP.
awplus#
Examples
awplus(config)#
awplus(config-route-map)#
fe80::203:47ff:fe97:66dc
awplus(config-route-map)#
C613-50186-01 Rev B
Parameter
<ipv6-addr-global>
local
<ipv6-addr>
configure terminal
route-map rmap1 permit 3
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The IPv6 global address of next hop. The IPv6 address
uses the format X:X::X:X.
Specifies that the address is local.
The IPv6 local address of next hop. The IPv6 address
uses the format X:X::X:X.
set ipv6 next-hop local
no set ipv6 next-hop
1411