Set Community - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS

SET COMMUNITY

set community
Overview Use this command to add a community set clause to a route map entry.
When a BGP update message matches the route map entry, the device takes one
of the following actions:
•
•
•
Use the no variant of this command to remove the set clause.
Syntax set community {[<1-65535>][AA:NN] [internet] [local-AS]
[no-advertise] [no-export] [additive]}
no set community {[AA:NN] [internet] [local-AS] [no-advertise]
[no-export] [additive]}
set community none
no set community none
C613-50186-01 Rev B
changes the update's community attribute to the specified value or values,
or
adds the specified community value or values to the update's community
attribute, if you specify the additive parameter after specifying another
parameter. or
removes the community attribute from the update, if you specify the none
parameter
Parameter Description
<1-65535>
The AS number of the community as an integer not in AA:NN
format.
AA:NN
The Autonomous System (AS) number of the community, in AA:NN
format. AS numbers are assigned to the regional registries by the
IANA (www.iana.org) and can be obtained from the registry in your
region.
AA and NN are both integers from 1 to 65535.
AA is the AS number; NN is a value chosen by the ASN administrator.
local-AS
The community of routes that must not be advertised to external
BGP peers (this includes peers in other members' Autonomous
Systems inside a BGP confederation).
internet
The community of routes that can be advertised to all BGP peers.
no-advertise The community of routes that must not be advertised to other BGP
peers.
no-export
The community of routes that must not be advertised outside a BGP
confederation boundary (a standalone Autonomous System that is
not part of a confederation should be considered a confederation
itself).
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1315