Clear Bgp Ipv6 (Asn) (Bgp4+ Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
6 (ASN) (BGP4+
CLEAR BGP IPV

clear bgp ipv6 (ASN) (BGP4+ only)

Overview Use this command to reset the BGP4+ connections to all peers in a specified
Autonomous System Number (ASN).
clear bgp ipv6 <asn> [in [prefix-filter]|out|soft [in|out]]
Syntax
clear bgp ipv6 <asn>
clear bgp ipv6 <asn> in [prefix-filter]
clear bgp ipv6 <asn> out
clear bgp ipv6 <asn> soft [in|out]
Mode Privileged Exec
Examples awplus#
awplus#
awplus#
awplus#
awplus#
awplus#
C613-50186-01 Rev B
)
ONLY
Parameter Description
<asn>
<1-4294967295>
Specifies the ASN for which all routes will be cleared.
in
Indicates that incoming advertised routes will be cleared.
prefix-filte
Specifies that a prefix-list will be sent, by the ORF mechanism, to
r
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local router
will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their updates
to the local device, without resetting the connection or clearing
the entries in the local device. So, the local device stores new
updates, and uses them to systematically replace existing table
entries. This process can use a considerable amount of memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
clear bgp ipv6 100
clear bgp ipv6 100 in
clear bgp ipv6 100 in prefix-filter
clear bgp ipv6 100 out
clear bgp ipv6 100 soft out
clear bgp ipv6 100 soft in
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1168