Show Running-Config Pppoe-Ac - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
- -
SHOW RUNNING CONFIG PPPOE

show running-config pppoe-ac

Overview Use this command to display the PPPoE Access Concentrator (AC) running
configuration.
show running-config pppoe-ac
Syntax
Mode Privileged Exec
Example To display the running configuration for the PPPoE AC, use the command:
awplus#
Output Figure 20-5: Example output from show running-config pppoe-ac
Related destination l2tp
Commands
l2tp peer-address dns-lookup
l2tp peer-address radius-lookup group
l2tp peer-address static
l2tp profile
pppoe-ac
ppp-auth-protocol
proxy-auth
service-name
show pppoe-ac config-check
C613-50186-01 Rev B
OMMANDS
AC
running-config pppoe-ac
awplus#show running-config pppoe-ac
pppoe-ac-service ISP-service
service-name remote-office advertised
ppp-auth-protocols pap
destination l2tp
l2tp peer-address static 192.168.11.2
l2tp profile PUBLIC
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
644