Show Ipv6 Ospf Neighbor - Allied Telesis AR2050V Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
SHOW IPV OSPF NEIGHBOR

show ipv6 ospf neighbor

Overview Use this command in User Exec or Privileged Exec modes to display information on
OSPF neighbors. Include the process ID parameter with this command to display
information about specified processes.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 ospf [<process-id>] neighbor <neighbor-id>
Syntax
show ipv6 ospf [<process-id>] neighbor detail
show ipv6 ospf [<process-id>] neighbor <interface> [detail]
Mode User Exec and Privileged Exec
awplus#
Examples
Output Figure 28-14: Example output from show ipv6 ospf neighbor

awplus#show ipv6 ospf P1 neighbor 2.2.2.2
OSPFv3 Process (P1)
Neighbor ID Pri
2.2.2.2 5
C613-50186-01 Rev B
Parameter
<process-id>
<neighbor-id>
detail
<interface>
show ipv6 ospf neighbor
State
2-Way/DROther
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
<character string>
The ID of the OSPF process for which information will be
displayed.
The Neighbor ID, entered in IP address (A.B.C.D) format.
Detail of all neighbors.
IP address of the interface.
Dead Time
00:00:33
"Getting Started
Guide.
Interface Instance ID
vlan3 0
1084