Update-Url (Ddns) - Allied Telesis AR2050V Command Reference Manual

D N S (DNS) C
OMAIN AME ERVICE
- (DDNS)
UPDATE URL

update-url (DDNS)

Overview Use this command to configure a URL for DDNS updates for the current DDNS
update method.
Use the no variant of this command to remove an update URL from a DDNS update
method.
Syntax update-url <url-name>
no update-url <url-name>
Default None
Mode DDNS Update Method Configuration
Usage The update URL (provided by the DDNS provider) can include a user name,
password, host name and/or IP address. These user values are optional because
they may vary depending on the DDNS provider's update URLs. AlliedWare Plus
requires you to enter the required parameters for the update URL using the
following placeholder tokens:
•
•
•
•
For example, for DynDNS the following update URL can be used:
http://username:password@members.dyndns.org/nic/update?
SYSTEM=dyndns&hostname=<h>&myip=<a>
To configure this URL, use the following command including the placeholder
tokens as written here:
awplus(config-ddns-update-method)#
http://<USERNAME>:<PASSWORD>@members.dyndns.org/nic/update?
SYSTEM=dyndns&hostname=<HOST-NAME>&myip=<IPADDRESS>
C613-50186-01 Rev B
OMMANDS
Parameter Description
<url-name>
The update URL is provided by the DDNS provider and can be
configured with the following placeholder tokens:
• <USERNAME>
• <PASSWORD>
• <HOST-NAME>
• <IPADDRESS>
To specify the values for <USERNAME>, <PASSWORD> and
<HOST-NAME>, use the commands username, password and
hostname. The value for <IPADDRESS> is populated
automatically from the interface IP settings.
for the user name enter "<USERNAME>"
for the password enter "<PASSWORD>"
for the host name enter "<HOST-NAME>"
for the IP address enter "<IPADDRESS>"
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
update-url
747