Ip Tcp Synack-Retries - Allied Telesis AR2050V Command Reference Manual

IP A P
DDRESSING AND ROTOCOL
-
IP TCP SYNACK RETRIES

ip tcp synack-retries

Overview Use this command to specify how many times the switch will retry sending a SYN
ACK for a TCP connection for which it has received a SYN but not an ACK. Such
connections are called half-open TCP connections. This command allows you to
influence how long half-open TCP connections take to time out.
Use the no variant of this command to return to the default setting of 5 retries.
ip tcp synack-retries <0-255>
Syntax
no ip tcp synack-retries
Default 5 retries
Mode Global Configuration
Usage The following table shows the approximate correlation between the number of
retries and the time half-open TCP connections take to time out.
Example To retry twice, which leads to a timeout of approximately 7 seconds, use the
commands:
awplus#
awplus(config)#
Related show running-config
Commands
Command Version 5.4.7-0.2: command added
changes
C613-50186-01 Rev B
C
OMMANDS
Parameter Description
<0-255>
Number of times to retry sending the SYN ACK
Number of retries
0 retries
1 retry
2 retries
3 retries
4 retries
5 retries
configure terminal
ip tcp synack-retries 2
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Approximate lower bound for the timeout
1 second
3 seconds
7 seconds
15 seconds
31 seconds
63 seconds
676