Peer Default Ip Address - Allied Telesis AR2050V Command Reference Manual

PPP C
OMMANDS

PEER DEFAULT IP ADDRESS

peer default ip address
Overview Use this command to set the default IP address assigned to the peer if required for
a given PPP interface.
Use the optional required keyword with this command to specify that the peer
must use this address for a given PPP interface, or drop the connection.
Use the no variant of this command to remove the previously specified peer
default IP address for a given PPP interface.
peer default ip address <default-ip-address> [required]
Syntax
no peer default ip address
Default No default IP address is configured to be assigned to the peer.
Mode Interface Configuration for a PPP interface
To configure the PPP interface ppp0 to assign the IP address of 192.168.0.1 to
Examples
its peer upon request, use the below commands:
awplus#
awplus(config)#
awplus(config-if)#
To configure the PPP interface ppp0 to have the default peer IP address of
192.168.0.1, and be required to use it or drop the connection, use the below
commands:
awplus#
awplus(config)#
awplus(config-if)#
required
To remove the default peer IP address of 192.168.0.1 from the PPP interface
ppp0, enter the below commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50186-01 Rev B
Parameter
<default-ip-
address>
required
configure terminal
interface ppp0
configure terminal
interface ppp0
configure terminal
interface ppp0
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Specify the IPv4 address to be assigned to the peer upon
request.
Optionally specify the peer to acknowledge the default IP
address, which requires the peer to use the address or drop the
connection.
peer default ip address 192.168.0.1
peer default ip address 192.168.0.1
no peer default ip address
594