Route Map Commands; Introduction; Chapter 30: Route Map Commands - Allied Telesis AR2050V Command Reference Manual

30

Introduction

Overview This chapter provides an alphabetical reference for route map commands. For
more information, see the
These commands can be divided into the following categories:
•
•
•
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50186-01 Rev B
Routemaps Feature Overview and Configuration
route-map command, is used to create a route map and/or route map entry,
and to put you into route map mode
match commands, used to determine which routes the route map applies to
set commands, used to modify matching routes
"match as-path" on page 1383
"match community" on page 1384
"match interface" on page 1386
"match ip address" on page 1387
"match ip next-hop" on page 1389
"match ipv6 address" on page 1390
"match ipv6 next-hop" on page 1391
"match metric" on page 1392
"match origin" on page 1393
"match route-type" on page 1395
"match tag" on page 1396
"route-map" on page 1397
"set aggregator" on page 1400
"set as-path" on page 1401
"set atomic-aggregate" on page 1402
"set comm-list delete" on page 1403
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Route Map
Commands
Guide.
1381