Policy-Based-Routing Enable - Allied Telesis AR2050V Command Reference Manual

P - R C
OLICY BASED OUTING OMMANDS
- -
POLICY BASED ROUTING ENABLE

policy-based-routing enable

Overview Use this command to enable policy-based routing (PBR). Policy-based routing lets
you determine how the device will route traffic from specified applications and
entities.
Use the no variant of this command to disable policy-based routing.
Syntax policy-based-routing enable
no policy-based-routing enable
Default Policy-based routing is disabled by default
Mode Policy-based-routing
Examples To enable policy-based routing use the following commands.
awplus#
awplus(config)#
awplus(config-pbr)#
To disable policy-based routing use the following commands.
awplus#
awplus(config)#
awplus(config-pbr)#
Related ip policy-route
Commands
ipv6 policy-route
C613-50186-01 Rev B
configure terminal
policy-based-routing
policy-based-routing enable
configure terminal
policy-based-routing
no policy-based-routing enable
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1428