Allied Telesis AR2050V Command Reference Manual page 1271

BGP BGP4+ C
AND OMMANDS
-
NEIGHBOR ROUTE MAP
Examples [BGP] The following example shows the configuration of the route-map name rmap2
and then the use of this map name in the neighbor route-map command for the
neighbor with the IPv4 address 10.10.10.1 in the Router Configuration mode.
awplus#
awplus(config)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config)#
awplus(config-router)#
The following example shows the removal of the route-map name rmap2 in the
neighbor route-map command for the neighbor with the IPv4 address 10.10.10.1
in the Router Configuration mode.
awplus#
awplus(config)#
awplus(config-router)#
in
The following example shows the configuration of the route-map name rmap2
and then the use of this map name in the neighbor route-map command for the
neighbor with the IPv4 address 10.10.10.1 in the IPv4 Address Family
Configuration mode.
awplus#
awplus(config)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
in
The following example shows the removal of the route-map name rmap2 in the
neighbor route-map command for the neighbor with the IPv4 address 10.10.10.1
in the IPv4 Address Family Configuration mode.
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
rmap2 in
C613-50186-01 Rev B
configure terminal
route-map rmap2 permit 6
router bgp 10
neighbor 10.10.10.1 route-map rmap2 in
configure terminal
router bgp 10
no neighbor 10.10.10.1 route-map rmap2
configure terminal
route-map rmap2 permit 6
router bgp 10
address-family ipv4
configure terminal
router bgp 10
address-family ipv4
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
match origin incomplete
set metric 100
exit
match origin incomplete
set metric 100
exit
neighbor 10.10.10.1 route-map rmap2
no neighbor 10.10.10.1 route-map
1271