Ip Vrf - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS

IP VRF

ip vrf
Overview This command creates a VRF instance and specifies its unique name. You can also
optionally specify a VRF ID. If you do not specify the VRF ID, a unique ID will
automatically be created and assigned to the VRF instance.
The no variant of this command removes a selected VRF instance. All interfaces
previously belonging to the removed instance are then returned to the global
routing and forwarding environment.
ip vrf <vrf-name> [<vrf-inst-id>]
Syntax
no ip vrf <vrf-name> [<vrf-inst-id>]
Mode Global Configuration
Default Static inter-VRF routing is enabled.
To create a VRF instance named vrf blue and assign it the ID number 2, use the
Example
following commands:
awplus#
awplus(config)#
Command Version 5.4.6-2.1: VRF-lite support added.
changes
C613-50186-01 Rev B
Parameter Description
<vrf-name>
The name of the VRF instance.
<vrf-inst-id>
The ID of the VRF instance, a number in the range 1 to 8.
config terminal
ip vrf blue 2
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1465