Neighbor Remote-As - Allied Telesis AR2050V Command Reference Manual

VRF- C
LITE OMMANDS
-
NEIGHBOR REMOTE AS

neighbor remote-as

Overview Use this command to configure an internal or external BGP or BGP4+ (iBGP or
eBGP) peering relationship with another router.
Use the no variant of this command to remove a previously configured BGP or
BGP4+ peering relationship.
Syntax neighbor <neighborid> remote-as <as-number>
no neighbor <neighborid> remote-as <as-number>
neighbor <neighborid> remote-as <as-number> [global|vrf
Syntax (VRF- lite)
<vrf-name>]
no neighbor <neighborid> remote-as <as-number>
Mode [BGP] Router Configuration or IPv4 Address Family Configuration
Mode [BGP4+] Router Configuration
Usage This command is used to configure iBGP and eBGP peering relationships with
other BGP or BGP4+ neighbors. A peer-group support of this command is
configured only after creating a specific peer-group. Use the no variant of this
command to remove a previously configured BGP peering relationship.
C613-50186-01 Rev B
Parameter Description
<neighborid> {<ip-address>|ipv6-addr>|<peer-group>}
<ip-address>
<ipv6-addr>
<peer-group>
<as-number> <1-4294967295> Neighbor's Autonomous System (AS) number.
global
Specify that the remote neighbor exists locally within the device,
in the global routing domain
vrf
Specify that the remote neighbor exists locally within the device,
in the specified VRF instance.
<vrf-name>
The name of the VRF instance.
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Specify the address of an IPv4 BGP neighbor,
in dotted decimal notation A.B.C.D.
Specify the address of an IPv6 BGP4+
neighbor, entered in hexadecimal in the
format X:X::X:X.
Enter the name of an existing peer-group. For
information on how to create peer groups,
refer to the neighbor peer-group (add a
neighbor) command, and
route-map command. When this parameter is
used with this command, the command
applies on all peers in the specified group.
neighbor
1473