Bgp Graceful-Restart Graceful-Reset - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
BGP GRACEFUL RESTART GRACEFUL

bgp graceful-restart graceful-reset

Overview This command enables BGP and BGP4+ graceful-restart when a configuration
change forces a peer restart.
Use the no variant of this command to restore the device to its default state.
Syntax bgp graceful-restart graceful-reset
no bgp graceful-restart graceful-reset
Default Disabled
Mode Router Configuration
Usage The
enabled. All events that cause BGP peer reset, including all session reset
commands, can trigger graceful-restart.
Example To enable the graceful-restart graceful-reset feature on the BGP or BGP4+ peer
belonging to Autonomous System (AS) 10, use the commands:
awplus#
awplus(config)#
awplus(config-router)#
To disable the graceful-restart graceful-reset feature on the BGP or BGP4+ peer
belonging to Autonomous System (AS) 10, use the commands:
awplus#
awplus(config)#
awplus(config-router)#
Related bgp graceful-restart
Commands
C613-50186-01 Rev B
-
RESET
bgp graceful-restart command must be enabled before this command is
configure terminal
router bgp 10
configure terminal
router bgp 10
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
bgp graceful-restart graceful-reset
no bgp graceful-restart graceful-reset
1139