PPP C
OMMANDS
PPP USERNAME
ppp username
Overview
This command creates or modifies a username for a PPP user on a configured PPP
interface.
ppp username <username>
Syntax
no ppp username
Default
There is no default PPP username defined or configured to a PPP interface.
Mode
Interface Configuration for a PPP interface.
To create the PPP username bob, for the PPP interface ppp0, use the commands:
Examples
awplus#
awplus(config)#
awplus(config-if)#
To remove the PPP username bob, for the PPP interface ppp0, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related
ppp authentication
Commands
ppp password
C613-50186-01 Rev B
Parameter
Description
<username> Specify a login name for the user. The name can contain up to 255
characters.
The name can contain any printable ASCII characters (ASCII 32-126). If
the name contains the special characters backslash, double-quote or
space, those characters should be escaped with a backslash.
configure terminal
interface ppp0
configure terminal
interface ppp0
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
ppp username bob
no ppp username
612