Show Ip Route - Allied Telesis AR2050V Command Reference Manual

R C
OUTING OMMANDS

SHOW IP ROUTE

show ip route
Overview Use this command to display routing entries in the FIB (Forwarding Information
Base). The FIB contains the best routes to a destination, and your device uses these
routes when forwarding traffic. You can display a subset of the entries in the FIB
based on protocol.
To modify the lines displayed, use the | (output modifier token); to save the output
to a file, use the > output redirection token.
VRF-lite If VRF-lite is configured, you can display routing entries in the FIB associated with
either the global routing domain or a named VRF.
show ip route [bgp|connected|ospf|rip|static|<ip-addr>|
Syntax
<ip-addr/prefix-length>]
show ip route {vrf <vrf-name>|global}
Syntax (VRF-lite)
[bgp|connected|ospf|rip|static]
Mode User Exec and Privileged Exec
Example To display the static routes in the FIB, use the command:
awplus#
To display the OSPF routes in the FIB, use the command:
awplus#
C613-50186-01 Rev B
Parameter
global
vrf
<vrf-name>
bgp
connected
ospf
rip
static
<ip-addr>
<ip-addr/prefix-length> Displays the routes for the specified network. Enter
show ip route static
show ip route ospf
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
If VRF-lite is configured, apply the command to the
global routing and forwarding table.
Apply the command to the specified VRF instance.
The name of the VRF instance.
Displays only the routes learned from BGP.
Displays only the routes learned from connected
interfaces.
Displays only the routes learned from OSPF.
Displays only the routes learned from RIP.
Displays only the static routes you have configured.
Displays the routes for the specified address. Enter
an IPv4 address.
an IPv4 address and prefix length.
801