Show Pppoe-Ac Connections - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
-
SHOW PPPOE AC CONNECTIONS

show pppoe-ac connections

Overview Use this command to display information about current routes for the specified
PPPoE Access Concentrator (AC) service or for all PPPoE AC services.
show pppoe-ac [<label>] connections
Syntax
Mode User Exec/Privileged Exec
Example To display current routes information for all PPPoE AC services, use the command:
awplus#
To display information about connected routes for the PPPoE AC service
"pppoeservice" only, use the command:
awplus#
Output Figure 20-3: Example output from show pppoe-ac connections
C613-50186-01 Rev B
OMMANDS
Parameter Description
<label>
The label for the PPPoE AC service.
show pppoe-ac connections
show pppoe-ac pppoeservice connections
awplus#show pppoe-ac connections 
PPPoE Access Concentrator Connection Status
------------------------------------------------------------------
Route Name: pppoeservice-eth1 
Route ID: 29785 
Source Information 
Interface: eth1 
Session ID: 14204 
Service Name: test 
State: Open 
Peer MAC: 00:00:cd:38:01:4f 
Destination Information 
Type: L2TP 
Tunnel ID: 11223 
Session ID: 57309 

Route Name: ac1-eth2
Route ID: 34409 
Source Information 
Interface: eth2 
Session ID: 14108 
Service Name: my_isp 
State: Open 
Peer MAC: 00:00:cd:38:01:4d 
Destination Information 
Type L2TP 
Tunnel ID 47432 
Session ID 10056
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x

639