Bgp Default Local-Preference (Bgp Only) - Allied Telesis AR2050V Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
BGP DEFAULT LOCAL PREFERENCE

bgp default local-preference (BGP only)

Overview This command changes the default local preference value.
The local preference indicates the preferred path when there are multiple paths to
the same destination. The path with the higher preference is preferred.
Use this command to define the default local preference value that the device will
advertise for the routes it sends. The preference is sent to all routers and access
servers in the local autonomous system.
The no variant of this command reverts to the default local preference value of
100.
Syntax bgp default local-preference <pref-value>
no bgp default local-preference [<pref-value>]
Default By default the local-preference value is 100.
Mode Router Configuration
awplus#
Examples
awplus(config)#
awplus(config-router)#
awplus#
awplus(config)#
awplus(config-router)#
C613-50186-01 Rev B
(BGP )
ONLY
Parameter Description
<pref-value>
<0-4294967295> Configure default local preference value.
The default local preference value is 100.
configure terminal
router bgp 100
configure terminal
router bgp 100
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
bgp default local-preference 2345555
no bgp default local-preference
1132