Allied Telesis AR2050V Command Reference Manual page 1278

BGP BGP4+ C
AND OMMANDS
-
NEIGHBOR SEND COMMUNITY
parameter is used with this command the community attributes are not
reannounced to the neighbor.
By default, both standard and extended community attributes are sent to a
neighbor.
Examples [BGP] awplus#
awplus(config)#
awplus(config)#
awplus(config-router)#
extended
awplus#
awplus(config)#
awplus(config)#
awplus(config-router)#
extended
awplus#
awplus(config)#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
extended
awplus#
awplus(config)#
awplus(config)#
awplus(config-router)#
awplus(config-router-af)#
extended
awplus#
awplus(config)#
awplus(config)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
C613-50186-01 Rev B
configure terminal
bgp config-type standard
router bgp 10
neighbor 10.10.0.72 send-community
configure terminal
bgp config-type standard
router bgp 10
no neighbor 10.10.0.72 send-community
configure terminal
bgp config-type standard
router bgp 10
address-family ipv4
configure terminal
bgp config-type standard
router bgp 10
address-family ipv4
configure terminal
bgp config-type standard
router bgp 10
neighbor group1 peer-group
neighbor 10.10.10.1 remote-as 10
neighbor 10.10.10.1 peer-group group1
neighbor group1 send-community extended
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
neighbor 10.10.0.72 send-community
no neighbor 10.10.0.72 send-community
1278